Subscribe

Latest Blog Post

build your in-house robotic expertise program

Try the New FT 300 Force Torque Sensor Feature

Amanda Lee
by Amanda Lee on May 31, 2018 3:16:53 PM

What's happening on DoF this week?

  • We’ve just launched a URCap – beta version – for a new FT 300 feature!
  • Got a question about a vision system? We might just have an answer for you.
  • How would you carry SS screws from the screw dispenser to their final position?

Learn more from automation Pros here!

Beta URCap for a new FT 300 feature

_MG_7265 (1)-1

This week we are very excited to bring you a beta version of a new FT 300 feature! The latest update is a new URCap node that uses FT 300 data to apply predefined forces and/or torques on a path recording node. With this new version, the robot can also have a spring effect in desired axes.

Check out the beta version of the new FT 300 feature and download the Beta Quickstart guide here.

Thoughts on the beta? Don't be shy to tell us your feedback!

 

Everything you need to know about vision

Screen Shot 2018-05-28 at 1.04.04 PM

This week, Jason_g asked a question about the possibility of using a camera to distinguish between two or more defined patterns, and then having an action performed after a specific pattern is detected. Our integration coach David_Gariepy stated that this could be achieved with the Wrist Camera.

For all camera-related questions, this eBook is a great guide.

 

Dealing with stainless steel screws

One of our team members, mathbelanger, is dealing with stainless steel screws and recently asked a question regarding the best way to carry SS screws from the screw dispenser to their final position. Do you guys have any ideas?

 

 Did we miss anything? Ask the Pros on DoF!

Leave a comment

Amanda Lee
Written by Amanda Lee
As an e-marketing coordinator, Amanda focuses on Robotiq's content management. With her background in marketing, she hopes to bring valuable, relevant, and consistent content to our audience through the blog, social media and video center.
Connect with the writer:

Related posts

Watch Our Automatica Demo Mashup (Featuring the New Hand-E)

We've had a big week of launches at automatica!

Have you checked out Hand-E yet? It's THE new adaptive gripper for...

Amanda Lee
By Amanda Lee - June 28, 2018
Use the Same Robot for More Than One Job

What's happening on DoF this week?

  • Read about how others deploy their robots for more than one job!
  • See how Scott Fetzer...
Sebastian Novais
By Sebastian Novais - May 17, 2018