Blog | Robotiq | EOAT

How to Reorganize Your Shop for a Collaborative Robot (part 2)

In the blog post related to the first part of this series, we talk about robot fixtures, part input and part output. These tips should have helped you figured out the general configuration of the collaborative robot for your workshop. However, if you really want to optimize your process, you need to probe a little deeper into the design of your cell. In fact, there are details that should be considered to get the most out of your robot integration. Let's look at them.

Mathieu Bélanger-Barrette

By Mathieu Bélanger-Barrette on May 19, 2015 1:24 PM. 5 min read time

How to Reorganize Your Shop for a Collaborative Robot (part 2)

In the blog post related to the first part of this series, we talk about robot fixtures, part input and part output. These tips...

Mathieu Bélanger-Barrette

By Mathieu Bélanger-Barrette on May 19, 2015 1:24 PM

Read more 5 min read time

What You Need to Know About Robot Grippers

End-of-arm tooling (EOAT) decisions literally can make or break any robotic production process because the choices made affect...

By Guillaume Robert on Feb 26, 2013 2:23 PM

Read more 4 min read time