When you want to use our product on other robot, we will need your bolt pattern. Then we will check if we can find a coupling that may correspond to your robot.
If there are no coupling that can fit, we can propose using a blank coupling. On this coupling you can machine holes where you wants to use screws.
We have 3 differents type of blank coupling depending on which Robotiq Product you want to use.
For the grippers (2F85, 2F140, Hand-E, Hand-E C-10, E-Pick) :
The diameter is measuring 71 mm and there are only some holes for fixing the grippers. The SKU for it is : AGC-CPL-BLANK-002. The replacement cable for this coupling is : CBL-COM-2066-01.
You can find the 3D on our website support here : https://robotiq.com/support
The direct link is : Blank coupling
For the 3F Gripper :
This coupling is more an adaptor plate for the 3F Gripper. The diameter is measuring 80 mm and there are only some holes for fixing the 3F grippers.
The SKU for it is : AGS-CPL-BLANK.
You can find the 3D on our website support here : https://robotiq.com/support
The direct link is : Blank coupling
For the FT-300S :
This coupling is more an adaptor plate for the FT-300. The diameter is measuring 89 mm and there are only some holes for fixing the FT-300.
The SKU for it is : FTS-300-S-CPL-BLANK.
You can find the 3D on our website support here : https://robotiq.com/support
The direct link is : FT 300-S Blank Coupling